| Parameter | Unit |
| Nominal Presure | KN |
| Max sheet dimension | mm |
| Carbon steel sheet | mm |
| Stainless steel sheet | mm |
| Max one-time punching diameter | |
| Dies | |
| Punching Accuracy | mm |
| Punching cycles per minute | cpm |
| Max punching frequency | cpm |
| Max sheet speed | m/min |
| Turret speed | rpm |
| Axes of control | |
| Main power | kW |
| Air presure | Mpa |
| Overall dimension(LxWxH) | mm |
| Weight | kg |
HPH-3044 HPH-3047 HPH-3048 300 1250x2500 6.35 4 Ø88.9 26 ±0.1 600 320 102 30 4(X, Y, T, C) 21 0.6 5600x2300x2200 14000 300 1250x4000 6.35 4 Ø88.9 26 ±0.1 600 320 102 30 4(X, Y, T, C) 23 0.6 5600x4000x2200 15000 300 1250x5000 6.35 4 Ø88.9 26 ±0.1 600 320 102 30 4(X, Y, T, C) 24 0.6 5600x5000x2200 16000 HPH-3057 HPH-3058 300 1500x400 6.35 4 Ø88.9 26 ±0.1 600 320 102 30 4(X, Y, T, C) 23 0.6 6100x4000x2200 18000 300 1500x500 6.35 4 Ø88.9 26 ±0.1 600 320 102 30 4(X, Y, T, C) 24 0.6 6100x5000x2200 19000
Hydraulic System
H+L hydraulic system completely from Germany, with cooling device of oil temperature, low energy consumption and little volume.
Hardened Die Bush
Turret adopt a sleeve structure, prolonging the service life, the die bush has a higher hardened surface, good antiwearability and easy to change.
CNC System
- Display 10.4 inch, true colour, multi language
- CPU: 223 MHZ/400MHZ
- I/O interface: RS232, 100M Ethernet, USB interface, CF card slot
- RAM: IG/40G
- Good expandability
Driving Turret
Compact structure, high precision of driving, reliable and stable.
Turret & Index Tools
Thrick turret structure, better guiding and higher precision.
Keeping-touch index tool position, higher precision and efficiency.
Lower Die Rapid Unloading
Lower die rapid loading and unloading accurately, rapidly, and conveniently
Standard Accessories
CNC controller is 802DSL from SIEMENS,Germany
Hydraulic system is a original complete set of ECO, from H+L, Germany.(50T punch using HBL hydraulic system from H+L.)
Standard station number:26LA2(B)
Manual side-positioning device
Brush worktable (30T punch); stainless table with steel balls (50T punch)
Strip-off detector, clamp-sensor
Manual lubrication system
Tool lamp for tooling change
Offen-use internal hexagonal key spanner for adjusting tools
Functions of punching, bottom forming etc.
Optional Accessories
CNC controller change to FANUC Oi-PC, Japan
CNCKAD (Israel) Software
RADAN (England) Software
Air-condition for e-cabinet (700W)
Moveable operating station
Tooling hoisting device by pneumatic cylinder,replace tooling device and table
Automatic lubricant
Blow and air mist system
Turret tooling station changed to 36LA2(B)
Location pin automatic up and down by pneumatic cylinder
Extra standard clamp
One full floating clamp
The location pin in the table-middle automatic up and down by pneumatic cylinder
Stainless worktable with steel balls. (30T punch)
CE option: Leuze light curtain with mirrors around the machine for safety guarding
Extra working table size by 1300835 mm/piece
Mobil hydraulic oil with the machine
